
Our Concrete Pump Fleet: 28 to 42 m Booms and Line Pumps
Here are the data sheets for the pumps we use on job sites in Montreal, Laval, the North Shore and the Laurentians: eight boom pump trucks, from 28 to 42 metres, and four line pumps.
Each sheet gives the reach, boom type and output stated by the manufacturer. Use them to prepare your request; our dispatch then confirms the right pump for your site.
Our Fleet at a Glance
Booms for height, line pumps for distance, and regular maintenance.
28 to 42 m Booms
Eight pump trucks, from a compact boom for a narrow driveway to a five-section boom.
Line Pumps
A truck-mounted pump and trailer pumps, for forms too far from the truck.
Eco-Track
Our booms carry eco-track technology, an asset when the site is lined with power lines or other obstacles.
Regular Maintenance
Every truck and pump goes through regular maintenance and checks, and the pumps are monitored in real time.
Our Boom Pump Trucks
Vertical reach is the height the unfolded boom can reach; horizontal reach is the distance it covers in front of the truck. Both matter when choosing a boom.
| Model (manufacturer) | Vertical reach | Horizontal reach | Boom | Max. output | Data sheet |
|---|---|---|---|---|---|
| S 28 X (Schwing) | 27.7 m | 23.7 m | double Z, 4 sections | 159 m³/h | PDF (French) |
| S 32 X (Schwing) | 32 m | 28 m | Roll and Fold, 4 sections | 161 m³/h | PDF (French) |
| KVM 34X (Schwing) | 34 m | 27.5* m | Roll and Fold, 4 sections | ≈ 130 m³/h | PDF (French) |
| 36 m (Putzmeister) | 35.70 m | 32.05 m | Roll and Fold, 4 sections | 160 m³/h | PDF (French) |
| S 36 SX (Schwing) | 36.1 m | 31.7 m | RZ4, 4 sections | 136 m³/h | PDF (French) |
| 40Z (Putzmeister) | 39.10 m | 35.10 m | Multi-Z, 4 sections | 160 m³/h | PDF (French) |
| JXR 41-4.16 (Alliance Concrete Pumps) | 40.5 m | 36.5 m | R-fold, 4 sections | 164 m³/h | PDF (French) |
| 42X-5RZ (DY Concrete Pumps) | 42.3 m | 38.3 m | roll and Z, 5 sections | 160 m³/h | PDF (French) |
Figures from page 1 of each sheet: manufacturer's specifications for standard units. * Net horizontal reach. Output is a theoretical maximum; on site, the pace depends on how fast the mixers arrive and how the crew works.
Our Line Pumps
A line pump moves concrete through a pipeline run along the ground and extended section by section to the forms: backyard, basement, inside a building, far end of a lot.
| Model (manufacturer) | Type | Max. output | Data sheet |
|---|---|---|---|
| JMP-60 (Alliance Concrete Pumps) | line pump | 64 m³/h | — |
| VSP 60 HP (Putzmeister) | truck-mounted | 43 m³/h | PDF (French) |
| SP 500 (Schwing) | stationary, single-axle trailer | 35 m³/h | PDF (French) |
| SP 750-18 (Schwing) | stationary, tandem-axle trailer | 53.5 m³/h | PDF (French) |
How to Read a Data Sheet
A few pointers for comparing the sheets:
- vertical reach: the maximum height of the boom tip, useful for an upper floor or a roof;
- horizontal reach: how far the boom carries concrete in front of it, from the truck's axis;
- unfolding height: the clear space needed above the truck to deploy the boom, under branches or wires;
- outriggers: their spread tells you how much room to leave around the truck.
These figures are maximums measured in ideal conditions. On a real site, obstacles, slope and room for the outriggers matter as much as the length of the boom.
To compare the two families of pumps, read our guide boom pump or line pump, then the one on choosing a boom length.
Our Fleet: Frequently Asked Questions
What is the longest reach in your fleet?
Our largest boom is the 42X-5RZ, a five-section boom: its sheet lists a vertical reach of 42.3 m and a horizontal reach of 38.3 m.
Can I book a specific pump?
Mention it in your request. The final choice is made once your site has been assessed: height, distance and access decide which pump is best placed for the job.
Do the data sheet figures apply to every job site?
They are the manufacturer's specifications for standard units. On site, the truck's position, obstacles and ground conditions can reduce the usable reach: we account for this in the quote.
Do you have pumps for places a truck cannot reach?
Yes. Our line pumps, including two stationary trailer pumps, push concrete through a pipeline to distant forms or right into a building.
Which pump suits a house foundation?
Most often a boom pump truck: from a single position, its boom follows the forms of the footings and then the walls. When the truck has to stay too far from the forms, a line pump takes over. Our guide on pumping concrete for a house foundation walks through each step.
What should I tell you so you pick the right pump?
Where the site is, when the pour is planned (day and time), what you are pouring, the height to reach, the distance from the street to the forms, and anything overhead, such as a branch or a wire. With these details, dispatch can compare the reach on the data sheets with your site.
Are your pumps for sale?
This page shows the pumps we use on our job sites. For pumps and equipment for sale, depending on availability, see our concrete pumps for sale page or call our office at 450-971-3163.

A Quote for Your Pumping Job
Tell us the height and distance to cover: we will suggest the right pump. Prefer to talk to someone? Call dispatch at 450-821-1165.